Ricoh Aficio MP W3600 Operating Instructions Manual page 52

Copying
G
Adjust the original guides to the width of the original, and then place the
original face down.
The original feeds into the machine automatically, and copying starts.
If [Press Start Key] is selected for [Feed Start Method], copying starts after you
press the {Start} key. See "Feed Start Method", General Settings Guide.
Note
2
❒ Always log off when you have finished using the machine to prevent un-
authorized users from using the machine.
❒ To stop the machine during a multi-copy run, press the {Clear/Stop} key af-
ter the original has fed in. The machine stops when the current copy finish-
es. Press [Yes] to cancel the copy job; press [No] to resume the interrupted
copy job.
❒ To cancel all copy jobs and return the machine to the default condition,
press the {Clear Modes} key.
❒ To clear entered values, press [Cancel] on the screen.
❒ To confirm settings, press [Check Modes].
❒ To stop the original feeding in, press the {Scanner Stop} key.
❒ If you register the settings using the program function, you can easily re-
call them by pressing the {Program} key.
❒ The number of scanned originals is displayed in the top right corner of the
screen.
Reference
p.9 "Original and Copy Output Locations"
p.20 "Placing Originals"
p.22 "To stop originals feeding in"
p.23 "Original Orientation"
p.125 "Programs"
"When the Authentication Screen is Displayed", About This Machine
"General Features (System Settings)", General Settings Guide
34