Ricoh Aficio MP W3600 Operating Instructions Manual page 112

Copying
E
Press [Program / Delete Stamp].
F
Press [mProgram], and then press the stamp number you want to program.
G
Enter the user stamp name (up to ten characters) with the letter keys, and
then press [OK].
H
Enter the horizontal size of the stamp with the number keys, and then press
2
[q].
I
Enter the vertical size of the stamp with the number keys, and then press
[q].
J
Adjust the original guides to A3 (11"×17")K or A4 (8
place the original for user stamp on the original table.
K
Press [Start Scanning].
The original will be scanned, and the stamp will be registered.
L
Press [Exit].
M
Press [Exit].
The display returns to the User Tools/Counter/Inquiry screen.
N
Press [Exit].
Exits settings and gets ready to copy.
Note
❒ Stamp numbers with m already have settings in them.
❒ If the stamp number is already being used, the machine will ask you if you
want to overwrite it. Press [Yes] or [Stop].
❒ Up to four user stamps can be registered.
❒ If the stamp is red or bright red, it may not be scanned clearly. To store a
user stamp clearly, use a black ink stamp, or make a copy and use that as
the original.
94
1
/ "×11")L, and then
2