• Inch version (Engineering)
400.0% (Area ratio 16 times): A → E
258.8%: A → D, B → E
200.0% (Area ratio 4 times): A → C, B → D, C → E
129.4%: A → B, B → C, C → D, D → E
64.7%: B → A, C → B, D → C, E → D
50.0% (Area ratio
32.4%: D → A, E → B
25.0%: E → A
• Inch version (Architecture)
400.0% (Area ratio 16 times): A → E
266.7%: A → D, B → E
200.0% (Area ratio 4 times): A → C, B → D, C → E
133.3%: A → B, B → C, C → D, D → E
66.7%: B → A, C → B, D → C, E → D
50.0% (Area ratio
33.3%: D → A, E → B
25.0%: E → A
• You can select a ratio regardless of original or paper size, or paper roll cut
method. With certain ratios, parts of the image might not be copied or mar-
gins will appear.
❖ Zoom
• The reproduction ratios you can specify are 25.0-400.0%.
• You can select a ratio regardless of original or paper size, or paper roll cut
method. With certain ratios, parts of the image might not be copied or mar-
gins will appear.
❖ Size Magnification
• The reproduction ratios you can specify are 25.0-400.0%.
• If the calculated ratio is over the maximum or under the minimum ratio, it
is automatically adjusted to within available range. However, with some
ratios, parts of the image might not be copied or margins will appear on
copies.
❖ Directional Magnification (%)
• The reproduction ratios you can specify are 25.0-400.0%.
• You can enter a ratio regardless of original or paper size, or paper roll cut
method. With certain ratios, parts of the image might not copy or margins
will appear.
• You cannot use Directional Magnification (%) if Auto Paper Select is selected.
times): C → A, D → B, E → C
1
/
4
times): C → A, D → B, E → C
1
/
4
Supplementary Information
4
157