Connecting The Machine; Connecting To The Interfaces - Ricoh Aficio MP W3600 General Settings Manual

1. Connecting the Machine

This chapter describes how to connect the machine to the network and specify
the network settings.

Connecting to the Interfaces

This section describes how to identify the machine's interface and connect the
machine according to the network environment.
1.
10BASE-T/100BASE-TX port
Port for connecting the 10BASE-T or
100BASE-TX cable
2.
USB2.0 port
Port for connecting the USB2.0 interface
cable
3.
Wireless LAN port (optional)
Port for using the wireless LAN
ATM001S
Note
❒ You cannot install these two options
at the same time: IEEE 802.11b wire-
less LAN board, Gigabit Ethernet
board.
❒ If the optional GigaBit Ethernet board
is installed, only the Ethernet interface
and USB interface on the board can be
used.
5