Connecting To The Ieee 802.11B (Wireless Lan) Interface - Ricoh Aficio MP W3600 General Settings Manual

Connecting to the IEEE 802.11b (Wireless LAN) Interface

This section describes how to connect to the IEEE 802.11b (wireless LAN) inter-
face.
Note
❒ Check the settings of the IPv4 address and subnet mask of this machine.
❒ For details about how to set the IPv4 address and subnet mask from the con-
trol panel of the machine, see "Interface Settings".
❒ Before using this machine with an IEEE 802.11b (Wireless LAN) connection,
you must select [IEEE 802.11b] in [LAN Type].
Reference
p.48 "Network"
Setup Procedure
This section describes how to setup IEEE 802.11b (wireless LAN) interface.
Set up IEEE 802.11b (wireless LAN) according to the following procedure:
Connecting to the Interfaces
ARH007S
1
9