Enabling E-Mps Functions; Kpdl Error Messages - Kyocera Ci1000 Technical Reference Manual

keys to the CollateDetails parameter should have the following integer values depending
on the mode of each e-MPS function.
Table 7.51. Enabling e-MPS Functions
e-MPS
Electronic sorting
Temporary job storage
Permanent job storage
Virtual mailbox
QuickCopy
QuickCopy (Private)
Proof and Hold
Stored job
Stored job—PIN secured true
Examples:
To post a print job into the virtual mailbox aliased Robert, a typical CollateDetails
sequence of parameters will be as follows:
<< /Collate true /CollateDetails << /Mode 8
/Destination [(Robert)]>> setpagedevice

KPDL Error Messages

Depending on the setting of the doautocontinue parameter, the printing systems having
the operator display display errors occurring during operation in the KPDL mode as fol-
lows.
KPDL Error ##
.. Press ON LINE
Any of the following error codes will appear if errors occur and doautocontinue is set to
false. When doautocontinue is set to true, only error codes 00 and 98 are available. These
error codes are also reported from the printer to the computer. Some software will dis-
play these error names on the computer screen.
Table 7.52. KPDL Error Messages
Code Error
00
01 dictfull
02 dictstackoverflow
03 dictstackunderflow Too many ends
04 execstackoverflow Execution stack nesting depth exceeded 250
05 handle
06 interrupt
07 invalidaccess
08 invalidexit
09 invalidfile
10 invalidfont
11 invalidrestore
/Collate /CollateDetails << >>
/Mode /Type
true 0
true 1
true 2
true 8
true 0 8
true 0 8
true 0 8
true 0 8
0 8
Meaning
Cannot initiate KPDL
Dictionary full; no new entries can be added
Too many begins
Name of error-reporting procedure
Control-C was received
Attempted violation of access attribute
Exit not enclosed in any loop
Invalid access string for file operator
Invalid font name or invalid font dictionary format
Restore would destroy composite object created after save
/Hold /Hold- /HoldKey
Type
0
1 0
1 1 (1234)
3
2 0
2 1 (1234)
KPDL Operators
7-139