Kyocera Ci1000 Technical Reference Manual page 241

Table 7.46. KPDL Status Operators (Sheet 3 of 5)
Preceding stack Operator
com10envelope
(4.125 x 9.5 envelope)
monarcenvelope
(3.875 x 7.5 envelope)
com6envelope
com9envelope
(3.75 x 8.875 envelope)
a5
a6
b6
b5envelope
c4envelope
c5envelope
custom
postcard
doublepostcard
bool setdefaultduplexmode
defaultduplexmode
bool setduplexmode
duplexmode
bool setdefaulttumble
defaulttumble
bool settumble
tumble
firstside
int setdefaultpapertray
Result Description
Set imageable area to Commercial 10
envelope size. See KPDL Printable Area on
page 140. This operator is in userdict.
Set imageable area to Monarch envelope size.
See KPDL Printable Area on page 140. This
operator is in userdict.
Set imageable area to Commercial 6 envelope
size. See KPDL Printable Area on page 140.
This operator is in userdict.
Set imageable area to Commercial 9 envelope
size. See KPDL Printable Area on page 140.
This operator is in userdict.
Set imageable area to A5 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
Set imageable area to A6 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
Set imageable area to B6 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
Set imageable area to ISO B5 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
Set imageable area to c4 envelope size. See
KPDL Printable Area on page 140. This
operator is in userdict.
Set imageable area to International C5
envelope size. See KPDL Printable Area on
page 140. This operator is in userdict.
Set imageable area to custom size. See KPDL
Printable Area on page 140. This operator is in
userdict.
Set imageable area to postcard size. See KPDL
Printable Area on page 140. This operator is in
userdict.
Set imageable area to double postcard size. See
KPDL Printable Area on page 140. This
operator is in userdict.
Select whether or not to print in duplex mode
as default. (true: duplex, false: simplex)
bool Get default duplex mode setting (true: duplex,
false: simplex)
Set/cancel duplex mode. (true: duplex, false:
simplex)
bool Get current setting of duplex mode. (true:
duplex, false: simplex)
Set duplex printing tumble mode for binding
on short side (true) or long side (false) of page.
bool Get the default tumble mode setting. (true:
short-edge bind, false: long-edge bind)
Set tumble mode. (true: short-edge bind, false:
long-edge bind)
bool Get current tumble mode setting. (true: short-
edge bind, false: long-edge bind)
bool During duplex printing, returns whether the
current print side is the front or back. During
simplex printing, returns whether the current
page is even or odd. (true: front or odd page,
false: back or even page)
Set the default paper tray as:
0: tray 1
1: tray 2
2: envelope feeder
3: MP tray (Cassette mode)
4: tray 3
5: tray 4
6: tray 5
7: tray 6
KPDL Operators
7-129