Related Manuals for ACV HRs 601
Summarization of Contents
USER'S GUIDE
THERMOSTAT
Explains the thermostat's function and components for HRs and JUMBO tanks.
APPLIANCE DESCRIPTION
MODELS - Types HRs 321 – 601 -800 - 1000 / JUMBO 800 - 1000
Overview of indirect storage water tanks for various installations and flow rates.
HRs 321-601
Details components of the HRs 321-601 model with a legend.
HRs/JUMBO 800 - 1000
Details components of the JUMBO 800-1000 model with a legend.
TECHNICAL CHARACTERISTICS
DIMENSIONS
Provides physical dimensions (Height, Diameter, etc.) for HRs tanks (soft casing).
Tank clearance
Specifies recommended and minimum clearances (D1, D2, H) for HRs tanks.
Tank dimensions
Provides physical dimensions for JUMBO tanks (800, 1000).
Tank clearance
Specifies recommended and minimum clearances (D1, D2, H) for JUMBO tanks.
ELECTRICAL CHARACTERISTICS (Option for HRs 321 - 601 - 800 - 1000)
Details rated voltage, frequency, power, and fuse rating for HRs models.
HYDRAULIC CHARACTERISTICS
Lists total capacity, circuit capacities, connections, surface area, and flow rates.
PERFORMANCE
Presents DHW performance data (peak flow, constant flow) at various temperatures.
MAXIMUM OPERATING CONDITIONS
Outlines maximum service pressure, operating temperature, and water quality guidelines.
INSTALLATION
PACKING CONTENTS
Lists items included in the boxes for HRs and JUMBO tanks.
TOOLS
Shows images of required tools for installation.
SAFETY INSTRUCTIONS
Provides general and specific safety guidelines for installation and operation.
PREPARATION OF THE TANK (HRS type with soft casing)
Illustrates steps for preparing the HRS tank with its soft casing.
PREPARATION OF THE TANK (JUMBO type with metal casing)
Shows visual steps for preparing the JUMBO tank with its metal casing.
CONNECTION TO THE DHW CIRCUIT (Typical floor installation)
Details the plumbing connections for the DHW circuit with a diagram and key.
CONNECTION TO THE PRIMARY CIRCUIT (Typical floor installation)
Details the plumbing connections for the primary circuit with a diagram and key.
PARALLEL TANK ASSEMBLY (Typical - 3 tanks)
Describes how to assemble multiple tanks in parallel for specific applications.
CONNECTION KITS (OPTION)
Shows diagrams and part numbers for optional connection kits.
STARTING UP
SAFETY INSTRUCTIONS TO FILL THE TANK
Provides safety guidelines for filling the DHW and primary circuits.
FILLING THE DHW TANK
Step-by-step instructions for filling the DHW tank, including connecting to the sewer.
FILLING THE PRIMARY CIRCUIT
Step-by-step instructions for filling the primary circuit, referencing the boiler manual.
CHECKS BEFORE STARTING UP
Lists final checks to ensure correct installation before commissioning.
MAINTENANCE
PERIODIC CHECKS BY THE USER
Outlines regular checks the user should perform on pressure gauges and valves.
ANNUAL MAINTENANCE
Details the service tasks to be performed annually by an engineer.
DRAINING THE PRIMARY CIRCUIT
Instructions for draining the primary circuit, including safety and procedure.
DRAINING THE DHW TANK
Instructions for draining the DHW tank, including safety and procedure.
BRINGING BACK INTO SERVICE AFTER MAINTENANCE
Refers to the "Starting up" chapter for post-maintenance commissioning.
Need help?
Do you have a question about the HRs 601 and is the answer not in the manual?
Questions and answers