ACV SLE 130 Installation, Operating And Servicing Instructions
Hide thumbs
Also See for SLE 130:
- Product manual (49 pages) ,
- Installation, operating and maintenance instructions (28 pages) ,
- Manual (15 pages)
Related Manuals for ACV SLE 130
Summary of Contents for ACV SLE 130
-
Page 1: Servicing Instructions
Installation, Operating and Servicing Instructions 130 / 160 / 210 / 240 / 300 EN • 1 661Y0200.C... -
Page 2: Table Of Contents
INDEX Warning Who should read these instructions Symbols Recommendations Applicable standards Warnings Packing introduction Description of function Description of operation technical characteristics Operating condition Wiring diagram installation Dimensions Installation Central heating connections Domestic hot water connection commissioning Filling the tank What to check start-up? Setting the thermostat maintenance... -
Page 3: Warning
An approved installer must carry out the assembly, commissioning, maintenance and repair of the system, in accordance with current standards in force. ACV shall not accept any responsibility for damage caused by non- Danger of burns compliant location of the system or by use of the parts or connections not approved by ACV for this application. -
Page 4: Introduction
50 mm containing no CFCs. losses when shut down Models [Watt] Lining sle 130 ∆t = 50°c 79,8 The tank is covered using polypropylene, a plastic material which offers a high resistance to shocks and which is also very sle 160 ∆t = 50°c... -
Page 5: Technical Characteristics
TECHNICAL CHARACTERISTICS oPerating condition Operating temperature Maximum service pressure [tank filled with water] - Heating circuit: 3 bar - Maximum temperature: 90°C - DHW circuit: 10 bar Water quality Test pressure [tank filled with water] • Chlorides: < 150 mg/L [304 Stainless steel] - Heating circuit: 4,5 bar <... -
Page 6: Dimensions
— — Weight empty [kg] Floor standing installation only. Single tank with three ways motorized mixing valve. central heating connections PiPe dimensions models Ø connection (female) sle 130 1” sle 160 1” sle 210 1” sle 240 1” sle 300 1”... -
Page 7: Domestic Hot Water Connection
- a non-return valve [3] - a safety valve [5]: (set to < 10 bar) sLe 130 Ø 3/4” [m] Ø 3/4” [F] - a sanitary expansion vessel of appropriate dimensions. sLe 160 Ø 3/4” [m] Ø... -
Page 8: Commissioning
There is a risk of scalding from hot water! bleed valve should be closed. ACV recommends the use of a thermostatic mixing valve set to provide water at 60 °C or less. • The water heated to wash clothes, dishes and for other purposes can burn and cause serious injury. -
Page 9: Maintenance
mAINTENANCE Periodical checks by the user Central heating tank • Check the pressure of the boiler’s pressure gauge: it should To empty off the primary circuit: be between 0.5 and 1.5 bar. • Carry out a monthly visual inspection of the valves, 1. - Page 10 55445006 24614152 54442045 54764021 54764020 N° 497B5010 497B5010 497B5010 497B5010 497B5010 497B0003 497B0005 497B0007 497B0009 497B0010 39438027 39438039 39438046 39438047 39438047 497B5002 497B5002 497B5002 497B5002 497B5002 EN • 10 661Y0200.C...
Need help?
Do you have a question about the SLE 130 and is the answer not in the manual?
Questions and answers
återförsäljare sweden