Control Concept - EUTECH INSTRUMENTS ALPHA CON 1000 CONDUCTIVITY CONTROLLERTRANSMITTER Instruction Manual

4.3

Control Concept

The main function and sub-function groups are organised in a matrix format as shown below. These
functions can be accessed via the front keypad for configuration and selection of parameters.
The controller offers two levels of password protection: (1) for direct access to calibration function and
(2) for setting or editing specific controller parameters or functions in the SETUP mode to suit individual
requirements.
Note: The passwords are not user-defined and have been set by factory. It is very important to keep
these passwords strictly confidential to avoid unauthorised tampering of the system at all times.
Note: If the user reads parameters only, the controller automatically reverts to Measurement mode if
none of the keys is pressed for 30 seconds.
68X216802
10