Related Manuals for Airwell SX 12 DC INV
Summarization of Contents
Introduction and Unit Identification
General Unit Description
Provides an overview of the DUO50 DCI as a high efficiency inverter outdoor unit compatible with various indoor units.
Key Features and Model Compatibility
Lists main features like DC Inverter, R410a, and compatibility with different indoor unit models.
Product Specifications
Outdoor Unit Specifications
Details technical specifications for the DUO 50 DCI outdoor unit, including capacity, input, and dimensions.
Indoor Unit Specifications
Provides detailed specifications for various indoor units: FLO 9/12 DCI, K 9/12 DCI, SX 9/12 DCI, BS 12 DCI.
Unit Combinations and Factors
Lists capacity and power input for DUO 50 DCI combinations and correction factors.
Performance and Operating Conditions
Rating Conditions and Operating Limits
Specifies standard rating conditions and defines the operating limits for cooling and heating modes.
Performance Data Tables
Contains detailed cooling and heating capacity data for various indoor units under different conditions.
Tubing Length Correction Factors
Illustrates capacity correction ratios based on the length of tubing used in the system.
System Diagrams and Connections
Pressure Curves
Graphical representation of suction and discharge pressures versus outdoor temperature for cooling and heating modes.
Electrical and Refrigeration Schematics
Includes electrical data, wiring diagrams, and refrigeration circuit diagrams for system understanding.
Tubing Installation Details
Provides guidelines for tubing connections, including bending, torque specifications, and oil trap requirements.
Control System Operation
System Operation Concept
Explains the master-slave relationship between indoor and outdoor units and capacity request via NLOAD.
Compressor and Fan Control Logic
Details target frequency setting, compressor starting, and indoor/outdoor fan speed control mechanisms.
Component Controls and Operating Modes
Describes the operation of EEV, RV, Ionizer, ESF, Base Heater, and fan/cool/heat modes.
System Protections
Outlines various protection functions including defrost, overheating, over current, and deicing mechanisms.
Configuration and Test Modes
Covers jumper settings for unit configuration, test mode procedures, software parameters, and dual split rules.
Troubleshooting and Maintenance
Safety Warnings
Crucial safety advice regarding high voltage and handling of the outdoor unit controller.
Failure Analysis and Diagnostics
Guides for identifying system failures using diagnostic codes (MSMP, MegaTool) and corrective actions.
Component Checks and Precautions
Step-by-step procedures for checking key components and general disassembly precautions.
Need help?
Do you have a question about the SX 12 DC INV and is the answer not in the manual?
Questions and answers