Testing An Installed Modem - 3Com 005687-03 Manual

Click Finish to exit ComTest. Go to "What
to Do with ComTest's Recommendation"
on page 8.
6. When you see this screen, click Finish to
exit ComTest.
Go to "What to Do with ComTest's
Recommendation" on
I M I
NTERNAL ODEM NSTALLATION WITH
page 8.
W 3.
INDOWS X

Testing an Installed Modem

If there is a modem already installed in your
computer, you can determine its COM and
IRQ settings by selecting the Test an installed
modem option. Follow the instructions on
screen until you see the screen that tells you
"Testing is complete." This screen will also tell
you which COM and IRQ settings your
present modem is using. These are the settings
you want to use for your new U.S. Robotics
modem. Write the settings down somewhere.
Shut down Windows, turn off and unplug your
computer, and remove your present modem.
Go to "How to Change the Modem's Settings"
on page 10.
7