Miele PT 7136 Operating And Installation Manual page 56

Settings
Contrast/Brightness
Display contrast and brightness can
be adjusted in 10 levels.
The bar shows the selected level.
Standby
The display goes into standby mode
after 10 minutes and the "Start"
button flashes slowly to save energy.
on
Standby is turned on:
– when no program is selected.
– after pressing the "Start" button.
– at the end of a program.
not during current program
(default setting)
Standby is turned on:
– when no program is selected.
Pressing any button or turning the jog
shuttle turns the display on again.
off
The display stays turned on.
56
Lengthening the cooling time
The cooling phase can be
lengthened before the program is
started. The laundry will be cooled.
The bar shows the selected level.
Delivery status: 0 minutes (normal
cooling down phase).
– The program duration is extended
respectively.
The cooling time cannot be extended in
the programs "Warm air, Cool air,
Woollen handcare, Smoothing".