Miele PT 7136 Operating And Installation Manual page 35

When installing multiple dryers to
one collective exhaust duct, a
non-return flap per dryer must be
installed directly to the collective duct.
Otherwise the dryers could be
damaged and the electrical safety
affected.
The installation of this unit in non
stationary locations (e.g. ships) must be
performed by a qualified installer or
service agency, in strict accordance
with national and local safety
regulations and standards.
Do not install the machine in rooms
where temperatures below freezing
may occur.
If there is any doubt concerning
installation, contact Miele's Technical
Service Department.
SAVE THESE
INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
35