Moving the print server to another IP network
LPD (line printer daemon) printing
FTP printing [for 310x only, not for 175x]
IPP printing [for 310x only, not for 175x]
IPX/SPX (In most cases, parameters do not need to be set on the print server.)
Note: The print server supports both IPX/SPX direct mode (peer-to-peer) and [for 310x only,
not for 175x] IPX/SPX in client/server mode with Novell NetWare servers.
DLC/LLC: [for 310x only, not for 175x] Can be enabled or disabled; otherwise there are no
parameters to set on the Jetdirect module.
AppleTalk: Printer Name and Printer Zone parameters can be set up using the HP LaserJet
Utility for MacOS.
SNMP: (Simple Network Management Protocol) used with your configuration and
management tools. The HP-Jetdirect-specific MIB (Management Information Base) is MIB-II
compliant; it is available upon request to
HP
support.
©2000, 2001, 2002 Hewlett-Packard Company
Need help?
Do you have a question about the 175X - JetDirect Print Server and is the answer not in the manual?