HP 175X - JetDirect Print Server User Manual page 53

3. Plug the DC power cord from the power module—shipped with the print server—into the power
connector on the rear end of the print server . Plug the power module into a power outlet.
Caution! Do not use the power module shipped
with your print server with any other products!
4. Verify the print server's LEDs:
The 10 or 100 LED on the rear end of the print server lights green to indicate the
connection speed.
The power/status LED
green, to indicate the server passed its self test.
on the top front begins blinking and within 15 seconds is solid