Operating The Avr-3808Ci Using A Browser (Web Control); Other Operations And Functions; Other Operations; Playing Super Audio Cds - Denon AVR-3808CI Owner's Manual

Surround mode
<SOURCE SELECT> INPUT MODE
<ZONE2/3 / REC SELECT>
uiop
CH SELECT
INPUT MODE
CH SELECT
uiop
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Operating the AVR-3808CI Using a
Browser (Web control)
This function lets you operate the AVR-3808CI using
Internet Explorer.
1 1
Check the AVR-3808CI's IP address.
: "Manual Setup" – "Network Setup" –
"Network Information" (vpage 32)
2
Input the AVR-3808CI's IP address in Internet
Explorer.
The AVR-3808CI can be operated in the same way as with regular
Internet browsing.
To use the web control function, set the GUI menu "Manual Setup"–
"Network Setup" – "Other" – "Power Saving" setting to "OFF"
(vpage 32).
Surround mode
Other Operations and
Functions

Other Operations

Playing Super Audio CDs

1
At the "Digital" or "HDMI" setting (vpage 39),
select the input source for which "DENON LINK" or
"HDMI" is assigned.
The " " or " " indicator lights on the display.
2
Use INPUT MODE to select "Auto" (vpage 37, 38).
Select the input mode according to the program source to be
played.
3
Select the surround mode (vpage 40, 41).
We recommend playing in the DIRECT mode.
4
Start playing the Super Audio CD.
The " " indicator lights on the display.
For operating instructions, refer to the respective equipment's
operating instructions.
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are fi rst converted
into PCM format, then into analog signals.
• "DSD DIRECT" is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. "DSD MULTI DIRECT" is shown on
the display when playing DSD multi--channel signals in the DIRECT
mode.