Operating The Avr-990 With A Browser (Web Control Function) - Denon AVR-990 Owner's Manual

Operating the AVR-990 with a Browser
(Web Control Function)
You can operate the AVR-990 using a browser.
1
Switch "ON" the "Network Standby" setting
(vpage 38).
2
Check the AVR-990's IP address with "Network
Information" (vpage 39).
Checking the IP address.
3
Enter the AVR-990 IP address in browser's address
box.
For example, if the IP address of AVR-990 is "192.168.100.33",
enter "http://192.168.100.33".
z1
z1: Entering the IP address.
4
When the top menu is displayed, click on the menu
you want to operate.
z2
z3
z5
z4
z2: Click when you operate each zone (vGExample 1H)
z3: Click when you operate the setup menu (vGExample 2H)
z4: Click to change the Web control screen setting. (vGExample
3H)
z5: Click when you operate a small screen such as a PDA screen,
etc. (vGExample 4H)
Convenient Functions
5
Operate.
GExample 1H Main zone control screen
z6
z7
z8 z9
z6: Click to perform each operation.
Changes to each operation screen (vGExample 5H)
z7: Click when you update to the latest information.
Normally, there is a change to the latest information each time
you operate. When operated from the main unit, click because
the screen is not updated.
z8: Click to return to the top menu.
Displayed when setting "Top Menu Link Setup" to "ON" in
GExample 3H
z9: Click to add a setting to the "Favorites" in your browser.
We recommend registering the setting screens for the different
zones in the browser's favorites so as not to accidentally
perform menu operations for zones you do not intend to
operate.
ENGLISH
See overleaf
0