Denon AVR-3808CI Addendum Sheet

AV SURROUND RECEIVER
AVR-3808CI
Thank you for purchasing DENON's product. When you operate the unit, please read the owner's manual and this sheet.
Correction
vpage 33 :
Option Setup
Make various other settings.
F Menu tree F
Manual Setup
Option Setup
a Amp Assign
s Volume Control
d Source Delete
f GUI
g Quick Select Name
h Trigger Out 1
j Trigger Out 2
k Remote ID
l 2Way Remote
A0 Dimmer
A1 Setup Lock
A2 Maintenance Mode
A3 Firmware Update
A4 Add New Feature
Addendum Sheet
Correction
vpage 36 :
A3 Firmware Update
Update the fi rmware of the receiver.
Check for Update
You can check for fi rmware updates. You can also check approximately
how long it will take to complete an update.
Start
Execute the update process.
When updating starts, the power indicator becomes red and the GUI
screen is shut down. The amount of update time which has elapsed
is displayed.
When updating is complete the power indicator becomes green and
normal status is resumed.
b If the display reads as shown below, check the settings and network
environment, then update again.
Display
Updating failed Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure connecting to server.
vpage 36 :
A4 Add New Feature
Display the new functions (payment required) which can be
purchased for downloading to the AVR-3808CI and upgrade.
When you purchase a new function and register your user information,
"Registered" is displayed on this menu and you can proceed with the
upgrade.
Upgrade
Execute the upgrade process.
When updating starts, the power indicator becomes red and the GUI
screen is shut down. The amount of update time which has elapsed
is displayed.
When updating is complete the power indicator becomes green and
normal status is resumed.
b If the upgrade is not successful, an error message identical to those
in "Firmware Update" will appear on the display, check the settings
and network environment, then update again.
Description
Notes concerning use of "Firmware Update"
and "Add New Feature
• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection.
• Do not turn off the power until updating or upgrating is
completed.
• Even with a broadband connection to the Internet, approximately
1 hour is required for the updating/upgrading procedure to be
completed.
Once updating/upgrade starts, normal operations on the
AVR-3808CI cannot be performed until updating/upgrading is
completed.
Furthermore, updating/upgrading the fi rmware may reset the
backup data for the parameters, etc., set for the AVR-3808CI.
Information regarding the "Firmware Update" function and "Add New
Feature" will be announced on the DENON web site each time related
plans are defi ned.
Additional Information
"
Printed in Japan 5431 10015 000D