Antenna Terminals - Denon AVR-3808CI Owner's Manual

Denon home theater system - av surround receiver user manual
Hide thumbs Also See for AVR-3808CI:
Table of Contents

Advertisement

Antenna terminals

An F-type FM antenna cable plug can be connected directly.
Direction of broadcasting station
FM antenna
75 Ω/ohms
Coaxial cable
FM indoor antenna
(supplied)
AM loop antenna assembly
Connect to the AM
antenna terminals.
Remove the vinyl tie and take
out the connection line.
a. With the antenna on top of
any stable surface.
Mount
Installation hole Mount on wall, etc.


AM loop antenna
(supplied)
AM outdoor antenna
Ground
1. Push the
Bend in the reverse direction.
NOTE
• Do not connect two FM antennas simultaneously.
b. With the antenna attached
• Even if an external AM antenna is used, do not
to a wall.
disconnect the AM loop antenna.
• Make sure the AM loop antenna lead terminals do not
touch metal parts of the panel.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Connection of AM antennas
2. Insert the
3. Return the
lever.
conductor.
lever.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-3808

Table of Contents