Fader Start - Denon DN-X100 Operating Instructions Manual

5

FADER START

If the separately sold DN-S5000, DN-S3000, DN-S1000 and etc. players are connected to FADER PGM1 or
PGM2, they can started using the Channel fader or Crossfader, as long as the 3.5 mm stereo mini cords have
been connected.
R R
DEL NO.
DELE NO. DN-S1000
MADE IN JAPAN FABRIQUE AU JAPO
LINE
OUT
FADER
LINE4
CD player (DN-S1000)
FADER
PGM1
FADER
FLIP A1 A2 B
BPM
MEMO CLR
PRESET
CONT.
/SINGLE
TAP
FLANGER
0
BRAKE
RVS
RANGE
DISC EJECT
PLAY/PAUSE PITCH BEND
(1)-2, 5
(2)-1
(1)-1
(1)-4
R R
MODEL NO.
FADER
L R L R
LINE
OUT
LINE2
FADER
FADER
PGM1
PGM2
CD player (DN-S1000)
FADER
PGM2
DN-X100
FLIP
CLR
MEMO
PRESET
TIME
CONT.
/SINGLE
TAP
FLANGER
FILTER
DISC MODE
BRAKE
RVS
CUE
DISC EJECT
(1)-2, 5
(2)-2, 5
(2)-1
(1)-1
(2)-4 (1)-4
Channel Fader Start
Turn on the CH 1/2 FADER
START switches @8 .
1
Move the Channel fader !3 of
CH-1 or CH-2 control all the
way to the bottom.
2
3
Set the standby mode on CD player.
Use the CH 1/2 FADER
CONTOUR controls #1 to
control the Channel fader
4
startup curve.
FADER
A1 A2
EXIT/
RELOOP
When you want to start the
1-MIN. SKIP
player, move up the Channel
fader !3 and the CD player
5
will begin playing.
NOTE:
• When the CH 1/2 FADER REVERSE switch is set
to ON, the corresponding fader's operating
direction is reversed.
ENGLISH
Crossfader Start
Turn on the CROSSFADER START A, B
switches @9 .
1
Slide the Crossfader !4 all the way in direction
opposite the source you want to start. (In the
following example, startup is done with the CD
player connected to PGM1.)
2
3
Set the standby mode on CD player.
Use the CROSS FADER
CONTOUR control #3 to
control the Crossfader
4
startup curve.
When the Crossfader !4 is slid in the opposite
direction, CD player play will begin.
5
NOTES:
• When the CROSS FADER REVERSE switch is
set to ON, the Crossfader's operating direction is
reversed.
• Channel Fader Start and Crossfader Start for the
same source will not operate simultaneously.
You must select from either one. If both CH
FADER START and CROSSFADER START A, B
switches are ON, priority will be the Crossfader.
9