Screen Scroll Operation (One-Touch Scroll) - Toyota LAND CRUISER Owner's Manual

Screen scroll operation
(one-touch scroll)
Touch any point on the map and that point
moves to the center of the screen and is
shown by the cursor mark.
If you wish to look at a point on the map which
is different to your current vehicle position,
you can bring the desired point to the center
of the screen by using the scroll feature.
If you continue to hold your finger on the
screen, the map will continue scrolling in that
direction until you lift your finger.
After you scroll the screen, the map remains
centered at the selected location until you ac-
tivate another function. The current vehicle
position mark will continue to move along
your actual route and may move off the
screen. When you touch the
VOICE"
button, the current vehicle position
mark returns to the center of the screen and
the map moves as you proceed along the
designated route.
INFORMATION
When you use the one-touch scroll fea-
ture, the current vehicle position mark
may disappear from the screen. Move
the map with a one-touch scroll again or
"MAP/VOICE"
push the button to re-
turn to the current vehicle position map
location display.
BASIC FUNCTIONS
D
To set the cursor position as a destina-
tion
You can set a specific point on the map as a
destination using the one-touch scroll func-
tion.
"MAP/
"Enter
Touch the
The screen changes and displays the map
location of the selected destination and
the route preference. (See " — Entering
destination" on page 38.)
If there is already a preset destination, touch
"Add to "
the switch or the
"
switch.
When there is already a preset destination,
"Add to "
using the
tional destination, will set the new one as the
first point of arrival.
"
switch.
"Replace
switch to set an addi-
5