Toyota LAND CRUISER Owner's Manual page 156

1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station (see "AUDIO- TUNE"
knob or "SEEK" button). Push and hold
down the button until you
beep—this will set the station to the but-
ton. The button number will appear on the
display.
To tune in to a preset station: Push the
button for the station you want. The but-
ton number and station frequency will ap-
pear on the display.
These systems can store one AM and two
FM stations for each button (The display
will show "AM", "FM1" or "FM2" when you
push "AM" "FM").
(Eject button)
Cassette tape
Push the cassette tape eject button to
eject a cassette.
156
Compact disc
To eject one compact disc only: Push and
release the compact disc eject button. If
you hold the button too long (if the audio
system is on at this time, you hear a
beep.), the mechanism will change to the
mode for ejecting all the discs loaded in
hear a
the changer. You can also eject any spe-
cific one of the discs loaded in the player
as follows:
1. Push either side of the " DISC "
button until the number of the disc
you want to eject is displayed.
2. Push and release the compact disc
eject button.
To eject all the discs loaded in the player:
Push and hold the compact disc eject but-
ton (until you hear a beep when the audio
system is on). The last compact disc
played before pushing the button will be
ejected first. If a disc is left in the slot
for a long time, the function to eject all
the discs will be automatically cancelled.
(Program)
Push " " to select the other side of a
cassette tape. The display indicates which
side is currently selected ("
top side, " " indicates bottom side).
Auto- reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
(Reverse/Fast forward buttons)
Cassette Player
Push the fast forward button to fast for-
ward a cassette tape. "FF" will appear on
the display. Push the reverse button to
rewind a tape. "REW" will appear on the
display.
To stop the tape while it is fast forward-
ing, push the fast
"TAPE"; to stop the tape while it is re-
winding, push the
"TAPE".
2004 L/C100 from Aug '03 Prod. (OM60A04U)
" indicates
forward button or
reverse button or