Toyota LAND CRUISER Owner's Manual page 459

(d) Detour setting
While the route guidance is operating, you
can change the route to detour around a
section of the route where a delay is
caused by road repairs, an accident, etc.
"Route"
1. Touch the switch.
"Detour"
2. Touch the switch.
3. Select the switch below to select the
desired detour distance.
"1 mile (km)", "3 miles (km)" or "5 miles
(km)": Touch one of these switches to start
the detour process. After detouring, the sys-
tem returns to the original guidance route.
"Whole Route": If you touch this switch, the
system will calculate an entire new route to
the destination.
DESTINATION INPUT AND ROUTE GUIDANCE
This picture shows an example of how the
system would guide you around a delay
caused by a traffic jam.
1 This position indicates the location of a
traffic jam caused by road repairs or an
accident.
2 This route indicates the detour sug-
gested by the system.
INFORMATION
: When your vehicle is on a freeway, the
detour distance selections are 5, 15,
and 25 miles (km).
: The system may not be able to calcu-
late a detour route depending on the
selected distance and surrounding
road conditions.
47