Toyota LAND CRUISER Owner's Manual page 160

SCAN button
Radio
You can either scan all the frequencies on
a band or scan only the preset stations
for that band.
To scan the preset stations:
Push and hold "SCAN" until you hear a
beep. The radio will tune in the next pres-
et station up the band, stay there for 5
seconds, and then move to the next pre-
set station. To select a station, push
"SCAN" again.
To scan all the frequencies:
Quickly push and release "SCAN". If you
hear a beep, you held the button too long,
and the radio will scan the preset sta-
tions. The radio will find the next station
up the station band, stay there for 5 se-
conds, and then scan again. To select a
station, push "SCAN" again.
Compact Disc Player
There are two scan features—you can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
player.
160
Scanning the tracks on a disc:
Quickly push and release "SCAN". "SCAN"
will appear on the display and the player
will scan all the tracks on the disc you
are listening to. If you hear a beep, you
held the button too long, and the player
will scan the first track of all the discs in
the player. To select a track, push "SCAN"
again. If the player scanned all the tracks
on the disc, it will stop scanning.
Scanning the first track of all the discs in
the player:
Push "SCAN" until you hear a beep.
" ·SCAN" will appear on the display
and the player will perform the first track
of the next disc. To select a disc, push
the "SCAN" again. If the player
scanned all the discs, it will stop scan-
ning.
SEEK TRACK button
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek a station, quickly push and re-
lease the " " or " ". Do this again to
find another station.
Cassette Player
By using this button, you can skip up or
down to a different track.
You can skip up to nine tracks at a time.
Push the right or left side of the button.
"FF 1" or "REW 1" will appear on the
display.
Next, push either side of
TRACK" button until the number on the
display reaches the number of tracks you
want to skip. If you push the button ten
times, the skip feature will be turned off.
When counting the number of tracks you
want to rewind, remember to count the
current track as well. For example, if you
want to rewind to a song that is two be-
has
fore the song you are listening to, push
on the left side of the button until "REW
3" appears on the display.
If you have pushed the track button more
than you wanted to, push the other side
of the button. The track number will be
reduced.
The track number you select is not valid
if it is higher than the number of tracks
remaining on the current cassette side.
:
After the beginning of the tape is
reached, the player will automatically
start playing the same side.
2004 L/C100 from Aug '03 Prod. (OM60A04U)
the "SEEK