Screen Scroll Operation (One-Touch Scroll) - Toyota CAMRY 2007 Owner's Manual

— Screen scroll operation
(one−touch scroll)
When any point on the map is touched, that
point moves to the center of the screen and is
shown by the cursor mark ( ).
1
Use the scroll feature to move the desired
point to the center of the screen for looking at
a point on the map that is different from the
current position of the vehicle.
If the finger is continuously held on the
screen, the map will continue scrolling in that
direction until the finger is removed.
A street name, city name, etc. of the touched
point will be shown, depending on the scale
of the map ( 2 ). Distance from the current
position to will also be shown (
After the screen is scrolled, the map remains
centered at the selected location until another
function is activated. The current vehicle
position mark will continue to move along
your actual route and may move off the
screen. When the "MAP/VOICE" button is
pushed, the current vehicle position mark re-
turns to the center of the screen and the map
moves as the vehicle proceeds along the des-
ignated route.
INFORMATION
When the one−touch scroll feature is
used, the current vehicle position mark
may disappear from the screen. Move
the map with a one−touch scroll again or
push the "MAP/VOICE" button to return
to the current vehicle position map loca-
tion display.
).
3
BASIC FUNCTIONS
:
To set the cursor position as a destina-
tion
A specific point on the map can be set as a
destination using the one−touch scroll func-
tion.
Touch "Enter ".
The screen changes and displays the map
location of the selected destination and the
route preference. (See "Starting route guid-
ance" on page 40.)
If there is already a set destination, "Add to
" and "Replace " are displayed.
"Add to ": To add a destination.
"Replace ": To delete the existing destina-
tions and set a new one.
9