Denon AVR-3310CI Owner's Manual page 13

Setting items
Surround Parameters Delay Time : Adjust delay time to control sound stage size.
• 0ms ~ 300ms (30ms)
(Continued)
Effect Level : Adjust effect signal level.
•
1 ~ 15 (10)
S et to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
Room Size : Determine size of acoustic environment.
• Small : Simulate acoustics of a small room.
• Medium small : Simulate acoustics of a medium-small room.
• Medium : Simulate acoustics of a medium room.
• Medium large : Simulate acoustics of a medium-large room.
• Large : Simulate acoustics of a large room.
NOTE
"Room Size" does not indicate the size of the room in which sources are
played.
Front Height : Set the front height channel.
• ON : Use the front height channel.
• OFF : Do not use the front height channel.
• "Front Height" is not displayed with the settings listed below.
• W hen the "Amp Assign" setting (vpage 8) is set to something other
than "Front Height"
• W hen the "Speaker Configuration" – "Front Height" setting (vpage
9) is set to "None"
• "Front Height" cannot be set if the HD Audio source being played
includes a front height channel. In this case, the Front height channel is
played back without decoding in PLgz mode, using the input signal.
• "Front Height" can be set by pressing
surround mode (DSP SIMULATION) (vpage 2).
Front Wide : Set the front wide channel.
• ON : Use the front wide channel.
• OFF : Do not use the front wide channel.
• "Front Wide" is not displayed with the settings listed below.
• W hen the "Amp Assign" setting (vpage 8) is set to something other
than "Front Wide"
• W hen the "Speaker Configuration" – "Front Wide" setting (vpage
9) is set to "None".
• "Front Wide" can be set by pressing
surround mode (DSP SIMULATION) (vpage 2).
Main remote control
operation buttons
Setting contents
[SPEAKERS]
in DENON original
[SPEAKERS]
in DENON original
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items
Surround Parameters AFDM (Auto flag detect mode) : Detects the source's surround back
channel signal and sets the optimum surround mode automatically.
(Continued)
• OFF : Do not set.
• ON : Set.
[Example] Playing Dolby Digital software (with EX flag)
• When "AFDM" is set to "ON", the surround mode is automatically set
to the DOLBY D + PLgx C mode.
• To play in the DOLBY DIGITAL EX mode, set "AFDM" to "OFF" and
"Surround Back" to "MTRX ON".
• Some Dolby Digital EX sources do not include EX flags. If the playback
mode does not switch automatically even when "AFDM" is set to "ON",
set "Surround Back" to "MTRX ON" or "PLgx CINEMA".
• If the setting in "Speaker Configuration" – "Surround Back" (vpage 9)
is "None", "Surround Back" is not displayed.
Surround Back : Sets the method of generating of the surround back
channel.
For 2-channel sources
n
ON : The surround back channel is used.
OFF : No signal is played from the surround back channels.
For multi-channel sources
n
Set the decoding method for the surround back channel.
DSCRT ON : Play the surround back signals included in the 7.1-channel
source.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
ES MTRX z1 : Generate and play the surround back signals from the
surround channel signals of the DTS source.
ES DSCRT z2 : Play the surround back signals included in the 6.1-
channel DTS source.
PLgx CINEMA z3 : Generate and play the surround back signals by
decoding the signals in the Dolby Pro Logic gx Cinema mode.
PLgx MUSIC : Generate and play the surround back signals by decoding
the signals in the Dolby Pro Logic gx Music mode.
OFF : The surround back channel is not played.
z1 : T his can be selected when playing DTS sources.
z2 : T his can be selected when playing DTS sources including a signal
to identify discrete 6.1-channel signals.
z3 : T his can be selected when "Speaker Configuration" – "Surround
Back" (vpage 9) is set to "2spkrs".
:Confirm the setting
ENGLISH
Setting contents
See overleaf

:Return to previous menu