Denon AVR-3310CI Owner's Manual page 10

ENGLISH
Making Detailed Settings (Manual Setup)
Setting items
Speaker Configuration Surround Back : Set the presence, size and number of surround back
speakers.
(Continued)
• Large : Use of a large speaker that can adequately playback low
frequencies.
• Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround back speakers are not connected.
• 2spkrs : Use two surround back speakers.
• 1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
• W hen the "Amp Assign" setting (vpage 8) is other than "Normal",
you cannot make the "Surround Back" setting.
• E ven when the Surround Back Speaker setting is other than "None",
sound may not be emitted from the surround back speaker, depending
on the playback source. In this case, "Surround Parameters" – "Surround
Back" setting other than "OFF" (vpage 12).
Front Height : Set the presence and size of the front height speakers.
• Large : Use of a large speaker that can adequately playback low
frequencies.
• Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the front height speakers are not connected.
W hen the "Amp Assign" setting (vpage 8) is other than "Front
Height", you cannot make the "Front Height" setting.
Front Wide : Set the presence and size of the front wide speakers.
• Large : Use of a large speaker that can adequately playback low
frequencies.
•
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the front wide speakers are not connected.
W hen the "Amp Assign" setting (vpage 8) is other than "Front
Wide", you cannot make the "Front Wide" setting.

Main remote control
operation buttons
Setting contents
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)
Setting items
Bass Setting Subwoofer Mode : Select low range signals to be reproduced by
subwoofer.
Settings for subwoofer and
• L FE : The low range signal of the channel set to "Small" speaker size is
LFE signal range playback.
added to the LFE signal output from the subwoofer.
• L FE+Main : The low range signal of all channels is added to the LFE
signal output from the subwoofer.
• This can be set when "Speaker Configuration" – "Subwoofer" (vpage
8) is set to "Yes".
• Play music or a movie source and select the mode offering the strongest
bass.
• S elect "LFE+Main" if you want the bass signals to always be produced
from the subwoofer.
LPF for LFE : Set LFE signal playback range.
• 8 0Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
Distance Unit : Set the unit of distance.
• F eet
Set distance from listening
• M eters
position to speakers.
Measure beforehand the
Step : Set the minimum variable width of the distance.
distance from the listening
• 1ft / 0.1ft
position to each speaker.
• 0 .1m / 0.01m
Front L / Front R / Center / Subwoofer / Surround L / Surround R /
S. Back L z / S. Back R z / Front Height L / Front Height R / Front Wide
L / Front Wide R : Select the speaker.
z: W hen the "Speaker Configuration" – "Surround Back" setting
(vpage 9) is set to "1spkr", "S. Back" is displayed.
• 0.0ft ~ 60.0ft / 0.00m ~ 18.00m : Set the distance.
• S peakers set to "None" in "Speaker Configuration" (vpage 8) are not
displayed.
• The speakers that can be selected differ depending on the "Amp Assign"
(vpage 8) and "Speaker Configuration" (vpage 8) settings.
• Default settings :
Front / Center / Subwoofer / Front Height / Front Wide : 12.0 ft (3.60 m)
Surround / Surround Back : 10.0 ft (3.00 m)
• Set the difference in the distance between the speakers to less than 20
feet (6.0 meters).
Default : Reset all distance settings to factory default.
• Y es : Reset to the defaults.
• No : Do not reset to the defaults.
W hen you select "Default" and press
prompt is displayed. Select either "Yes" or "No", and press
:Confirm the setting
Setting contents
ENTER
, the "Default Setting?"
ENTER
:Return to previous menu
.