Operations During Playback; Turning The Power On - Denon AVR-1909 Owner's Manual

ENGLISH
Playback
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT>
<SOURCE> PHONES jack
<POWER> BAND TUNING
<ON/STANDBY>
<SPEAKERS>
[Front]
[ON/SOURCE]
[OFF]
[QUICK SELECT]
SOURCE SELECT
[TUNER]
SHIFT
TUNING
[MASTER
VOLUME]
[CHANNEL + –]
[MUTING]
[SOURCE
CONTROL 1]
[SOURCE
CONTROL 2]

Preparations
BUTTON

Turning the Power On

<BUTTON>
[BUTTON] 1
<POWER>
Press
The power indicator lights red and the power is set to the
standby mode.
SHIFT
<PRESET>
2
<ON/STANDBY>
Press
The power indicator flashes green and the power turns on.
SOURCE SELECT
b Also press
turns on. In this case the input source is selected by remote
control unit.
[QUICK SELECT]
b Also press
turns on. In this case Quick Select is selected.
Turning the Power Off
<ON/STANDBY>
q Press
The power is set to the standby mode.
<POWER>
w Press
<MASTER VOLUME>
The power indicator turns off, and so does the power.
NOTE
[Rear]
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, either press
the power, or unplug the power cord from the power outlet.
• When the multi-zone power is switched on, and you want to switch
off the main zone power, press
[TUNER]
SOURCE SELECT
Selecting the Input Source
TUNING
Select the source using
[MODE]
<SOURCE SELECT>
Turn
BAND
between input sources.
[MEMORY]
If "Rec Select" is selected for the input source, press
<SOURCE SELECT>
before turning
.
[ON/SOURCE]
or .
when in standby mode, the power
when in standby mode, the power
[OFF]
or .
.
<POWER>
to turn off
[OFF]
.
SOURCE SELECT
.
[SOURCE SELECT]
or press to switch
<SOURCE>
.

Operations During Playback

Adjusting the Master Volume
<MASTER VOLUME>
Either turn
VOLUME]
.
[Variable range] – – – –80.0dB ~ 18.0dB
NOTE
The adjustable range will differ depending upon factors such as the
type of input signal and the channel level setting.
Turning Off the Sound Temporarily (Muting)
[MUTING]
Press .
• The sound is reduced to the level set at menu "Manual Setup" –
"Option Setup" – "Volume Control" – "Mute Level".
[MUTING]
• To cancel, press again. Muting can also be canceled by
adjusting the master volume.
Listening with Headphones
Plug the headphones into the PHONES jack on the main
unit.
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the front speakers
<SPEAKERS>
Press .
Front A Front B
Front A+B
NOTE
<SPEAKERS>
When set to "Custom", does not operate.
[MASTER
or press