Component With Multi-Channel Output Connectors; Antenna Terminals - Denon AVR-1909 Owner's Manual

Component with Multi-channel Output
connectors
Blu-ray Disc player / DVD player /
External decoder
L R L R
L R L R
• To play the analog input signals input to the EXT. IN connectors,
INPUT MODE
press the button on the main unit or
the remote control unit and select "EXT. IN" or make the settings at
menu "Input Setup" – "Input Mode" – "Input Mode" – "EXT. IN"
(vpage 34).
• The video signal can be connected in the same way as a Blu-ray Disc
player / DVD player (vpage 12).

Antenna terminals

An FM antenna cable plug can be connected directly.
AM loop antenna
(supplied)
L R
L R
AM outdoor
antenna
n AM loop antenna assembly
INPUT
button on
Mount
Installation hole Mount
on wall, etc.
1. Push the lever.
Direction of broadcasting station
NOTE
FM antenna
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
75 Ω/ohms
• Make sure the AM loop antenna lead terminals do not touch metal
Coaxial cable
parts of the panel.
FM indoor
antenna
(supplied)
Ground
Remove the vinyl tie and take out
the connection line.
Bend in the reverse direction.
a. With the antenna on top of any
stable surface.
b. With the antenna attached to a
wall.
ENGLISH
Connection of AM antennas
2. Insert the conductor. 3. Return the lever.