Pty Search; Tp Search; Rt (Radio Text - Denon AVR-1909 Owner's Manual

PTY Search

Use this function to find RDS stations broadcasting a
designated program type (PTY).
For a description of each program type, refer to "Program
Type (PTY)" .
1
<SOURCE SELECT>
Either turn or press
select "TUNER".
2
[SOURCE CONTROL 1]
Set to "AUDIO" and
CONTROL 2]
to "TUNER".
(vpage 56 "Remote Control Unit Operations")
3
<RDS>
Press to select "PTY".
4
Watching the display, press ui to call out the desired
program type.
5
<PRESET> [CHANNEL+ –]
Press or
PTY search begins automatically.
b If there is no station broadcasting the designated program type
with the above operation, all the reception bands are searched.
b The station name is displayed on the display after searching
stops.
6
To continue searching, repeat steps 2 to 4.
b If no station broadcasting the designated program type is found
when all the frequencies have been searched, "NO PROGRAMME"
is displayed.

TP Search

Use this function to find RDS stations broadcasting traffic
programs (TP stations).
1
Either turn
select "TUNER".
[TUNER]
to
2
[SOURCE CONTROL 1]
Set
CONTROL 2]
[SOURCE
(vpage 56 "Remote Control Unit Operations")
3
<RDS>
Press
4
<PRESET>
Press
TP search begins automatically.
b If no TP station is found with the above operation, all the reception
bands are searched.
b The station name is displayed on the display after searching
.
stops.
5
To continue searching, repeat steps 2 to 3.
b If no other TP station is found when all the frequencies have been
searched, "NO PROGRAMME" is displayed.
<SOURCE SELECT> [TUNER]
or press
[SOURCE
to "AUDIO" and
to "TUNER".
to select "TP".
[CHANNEL+ –]
or .

RT (Radio Text)

"RT" appears on the display when radio text data is
received.
1
<SOURCE SELECT>
to Either turn
select "TUNER".
2
[SOURCE CONTROL 1]
Set to "AUDIO" and
CONTROL 2]
to "TUNER".
(vpage 56 "Remote Control Unit Operations")
3
<RDS>
Press to select "RT".
b While receiving an RDS broadcast station, the text data broadcast
from the station is displayed.
b To turn the display off, press o p.
b If no text data is being broadcast, "NO TEXT DATA" is displayed.
n To end RDS search / PTY search / TP search / RT
• Do not operate anything for 15 seconds.
<RDS>
• When setting RT, press .
ENGLISH
[TUNER]
or press to
[SOURCE