Lexicon PCM 81 - REV 2 User Manual page 150

PCM 81
4.0 VoxFix E2>C6
This preset is set up to be used with a MIDI controller with a
keyboard, pitch bender and sustain pedal. It provides three
different methods to correct pitch problems. You can: use the
bender to change the pitch "on the fly," use the sustain pedal to
turn correction on and off, or fix a bad note by playing the correct
one on the keyboard. Press Edit to see the notes displayed. ADJUST
is patched to turn correction on and off. All of the pitch
parameters that aren't patched are in the Soft Row. Low Note and
High Note are tuned to the full vocal range (E2 through C6).
4.1 VoxFix Bass
The same as VoxFix E2>C6, except that it is tuned to the bass range
(E2-A4).
4.2 VoxFix Tenor
The same as VoxFix E2>C6, except that it is tuned to the tenor
range (C3-C5).
4.3 VoxFix Alto
The same as VoxFix E2>C6, except that it is tuned to the alto range
(F3-F5).
4.4 VoxFix Sprno
The same as VoxFix E2>C6, except that it is tuned to the soprano
range (C4-C6).
4.5 KnobCentsUp
For tracks that are consistently flat. Use ADJUST to tune the track
up, and a MIDI keyboard to fix bad notes.
ADJUST: On/Off 0-1
ADJUST: On/Off 0-1
ADJUST: On/Off 0-1
ADJUST: On/Off 0-1
ADJUST: On/Off 0-1
ADJUST: Sharp 0–100
4.6 KnobCentsDN
For tracks that are consistently sharp. Use ADJUST to tune the track
down, and a MIDI keyboard to fix bad notes.
4.7 Double Effect
This preset produces an alternative double track effect. Mix the
output of the PCM 81 with the original vocal track. Use ADJUST to
randomize the amount of delay and pitch difference between the
original and processed tracks.
4.8 Knob Freeze
This one is a special effect. Turn ADJUST from 0 to 1 to freeze the
pitch of the vocal track to whatever was being sung when the knob
was turned. Turn it back down to 0 to release the pitch. Mixed with
the original, this creates drone-like harmonies. By itself, this effect
is a new take on "robot" voices.
4.9 Demo Correct
This preset is for demonstration use. The left input is turned off and
all the pitch parameters are in the Soft Row.
Presets
ADJUST: Flat 0-100
ADJUST: On/Off 0-1
ADJUST: On/Off 0–1
ADJUST: unused
4-33