Anlg In Lvl; Auto - Lexicon MC-12HD User Manual

Digital controller
Hide thumbs Also See for MC-12HD:
Table of Contents

Advertisement

MC-12HD

ANLG IN LVL

SETUP
INPUTS
DVD1
ANGL IN LVL
Opens the ANLG IN LVL menu, to adjust the 2-channel (and
5.1-channel when the MAIN ADVANCED
parameter is set to OFF) analog audio input levels for the selected
input. Analog audio sources have a wide range of levels. To
compensate, the MC-12HD allows independent input level
adjustment of each stereo analog audio input connector. The input
level of the 5.1-channel analog audio input connector is only
adjustable when the ANALOG BYPASS parameter is set to OFF.
Parameter
Possible Settings

AUTO

ON, OFF
MANUAL
-18 to +12dB
AUTO GAIN*
-18 to +12dB
* This parameter cannot be adjusted.
SETUP
MAIN MENU
INPUTS
MODE ADJUST
SPEAKERS
AUDIO CONTROLS
REAR PANEL CONFIG
SETUP
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION
AUTO, -18 to +12 dB
ANALOG BYPASS
INPUT SETUP
DVD1 INPUT SETUP
NAME
DVD1
HDMI IN
DVD2
DIGITAL IN HDMI AUDIO
LD
ANALOG IN
TV
ANLG IN LVL
SAT
VIDEO IN
VCR
COMPONENT IN
CD
2-CH
PVR
D
GAME
TAPE
5.1mc
TUNER
MIC
AUX
MAIN ADVANCED
ZONE2 IN
RECORD IN
RECORD ADVANCED
Note:
Adjustments made on the ANLG IN LVL menu are applied to the stereo
analog audio input connector assigned for the selected input. When
another stereo analog audio input connector is assigned, these
adjustments are automatically applied to the new connector.
AUTO
SETUP
INPUTS
DVD1
ANGL IN LVL
Provides automatic adjustment of 2-channel (and 5.1-channel
when the MAIN ADVANCED ANALOG BYPASS parameter is set to
OFF) analog audio input levels. When set to ON, the input levels are
automatically monitored and optimized. When the input signal is
too high, the input levels are quickly decreased to avoid overload.
When the input signal is too low, the input levels are slowly
increased to maximize the signal-to-noise ratio and dynamic range.
When set to OFF, the 2-channel and 5.1 analog audio input levels
are not automatically monitored and optimized. Instead, input
levels must be adjusted with the ANLG IN LVL MANUAL parameter.
DVD1 ANLG IN LVL
DVD1
AUTO
HDMI-1
MANUAL
NONE
AUTO
AUTO GAIN
NONE
dB
L
R
1
0
-6
FILM
-15
5.1
FILM
-30
FILM
-45
5.1mc
FILM
LIVE! MED
DMIX
DMIX
ON, OFF
AUTO
ON
OFF
ON
+0dB
-18 to +12dB
+0.0dB
Setup
3-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents