Zone 2 Audio Output Connectors; Record Zone Video Output Connectors; Ir In Connector; Record Zone Audio Output Connectors - Lexicon MC-12HD User Manual

MC-12HD

7 ZONE 2 AUDIO OUTPUT CONNECTORS

Provide analog audio output in Zone 2. Two sets of stereo
connectors labeled Audio L/R are available. The connectors labeled
Fix pass audio at fixed output levels. The connectors labeled Var
pass audio at variable output levels and include a built-in volume
control.

8 RECORD ZONE VIDEO OUTPUT CONNECTORS

Provide video output in the Record Zone. Two composite video
connectors and two S-video connectors are available. These
connectors can be used to connect a monitor or video recording
device.

9 IR IN CONNECTOR

Accepts input of IR signals from infrared distribution equipment.
One 3.5mm jack that accepts a stereo plug (Tip/Ring/Sleeve
connection) or mono plug (Tip/Sleeve connection) is available.

10 REMOVABLE ACCESS PANEL

Covers the expansion slot, which is reserved for emerging
technologies.

11 POWER SWITCH

The Power Switch disconnects power from the AC Input Connector
(12) to the product. The I and O positions represent "on" and "off"
status respectively. When the MC-12HD is powered on, the front-
panel Standby button or remote control On button can be used to
activate and deactivate standby mode. When the MC-12HD is
powered off, standby mode is not available.

12 AC INPUT CONNECTOR

Provides power to the MC-12HD through the supplied power cord.

13 RECORD ZONE AUDIO OUTPUT CONNECTORS

Provide analog and digital audio output in the Record Zone. Two
stereo connectors labeled Audio L/R output analog audio. The
connector labeled Fix passes audio at a fixed output level. The
connector labeled Var passes audio at variable output levels and
includes a built-in volume control. Two S/PDIF connectors (one
coaxial and one optical) output digital audio.
These connectors can be used to connect a recording device. When
the Record Zone audio output connector labeled Var is connected
to a recording device, you should set the volume to +0dB to
achieve appropriate recording levels. See "REC PWR ON" on page
3-72 for more information.

14 RS-232 CONNECTORS

The RS-232 serial connector (1) is used to perform backup and
restoration of configuration files and flash memory software
upgrades. The RS-232 connector (2) is capable of supporting
future developments.
15 MAIN ZONE AUDIO OUTPUT CONNECTORS
Provide analog audio output in the Main Zone. Ten connectors
labeled Front L/R, Center, LFE, Subwoofer L/R, Side L/R, and Rear
L/R are available. Two connectors labeled Aux L/R are provided for
future expansion.
Basic Operation
2-9