Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hydromatic HPGH
Summarization of Contents
General Information
Unpacking Pump
Instructions for inspecting the pump upon receipt and handling shipping damage claims.
Pump Description
Details the features of HYDROMATIC submersible grinder pumps, including seals and motor housing.
Codes and Regulations
Highlights the importance of adhering to local wiring codes during installation.
Pump Installation
Location Requirements
Guidance on pump placement in basins and the need for vertical submersion.
Application Specifications
Defines the operating parameters for these pumps, such as PH and viscosity.
Electrical Connections
Procedures for safely connecting the pump motor to the control panel.
Pump Operations
Starting The Pump
Step-by-step guide for initial pump startup, including rotation check and venting.
Pump Maintenance
Replacing Grinder Parts
Detailed instructions for disassembling and replacing pump impeller and cutter components.
Replacing Seals
Procedure for draining oil, dismantling the pump, and replacing seal components.
Replacing Motor Stator
Steps for removing and replacing the motor stator, including handling wiring safely.
Replacing Bearings
Guide to draining motor oil, removing components, and replacing pump bearings.
Pump Troubleshooting
Troubleshooting: Pump is Noisy
Lists potential causes for abnormal pump noise, such as bearing or clearance issues.
Troubleshooting: No Liquid Delivered
Identifies common reasons for the pump failing to deliver any liquid.
Troubleshooting: Insufficient Liquid Delivered
Outlines causes for reduced liquid output from the pump.
Troubleshooting: Insufficient Discharge Pressure
Lists potential issues leading to insufficient discharge pressure.
Troubleshooting: Motor Overload
Explains common factors causing the pump motor to overload.
Need help?
Do you have a question about the HPGH and is the answer not in the manual?
Questions and answers