Reverb Parameters - Lexicon LXP-5 - REV 1 Owner's Manual

LXP-5 Owner's Manual

Reverb Parameters

Parameter #
Pitch/Delay
Decay Time 11 0.5-12 seconds 0.5 sec.-infinity
Function: Adjusts mid reverb time. Infinite reverb is available in Delay/ Reverb algorithm only.
Treble Decay 12
to full range
Function: Provides an adjustment of the low pass filter within the reverb. Maximum setting
gives a flat response through the filter section.
Bass Multiply 13 x0.3 to x2.5
Function: Provides control over bass reverb time.
Size 14 8 - 26 meters
Function: Adjusts the room size. The range is for one side of a room; cube these values to
get the approximate room volume.
Diffusion 15
Function: Softens the attack of percussive sounds in the reverberator.
Equalization Parameters
Parameter #
Pitch/Delay
High Cut Filter 16
to full range
Function: Provides adjustment of high frequency roll-off. Maximum setting gives flat response
through the filter section.
Low Cut Filter 17
Function: Provides adjustment of low frequency roll-off. Minimum setting gives flat response
through the filter section.
4-12
Range:
Delay/Reverb
320 Hz 320 Hz
to full range
x0.3 to x2.5
8 - 53.5 meters
0 - 100% 0 - 100%
Range:
Delay/Reverb
320 Hz 320 Hz
to full range
Full range Full range
to 1350 Hz to 1350 Hz
Increment Resolution
varies 15 steps P/D
min. is 0.1 sec. 16 steps D/R
logarithmic 16 steps
linear 32 steps
linear 26 steps P/D
64 steps D/R
1% 101 steps
Increment Resolution
logarithmic 16 steps
logarithmic 32 steps