Led Signals - Lexicon LXP-5 - REV 1 Owner's Manual

LED signals

The front panel LEARN indicator is a bicolor (red/green) LED that performs
several functions:
Register Store: success or failure
The LEARN LED will blink at a 6 Hz rate for approximately 2 seconds — in
green to indicate succesful register storage, red to indicate failure to store
to a register.
MIDI Data Present
The LEARN LED will flicker (in whatever its current color) to indicate LXP-
5 recognition of incoming MIDI messages. System Common messages,
non-LXP-5 SysEx messages and any message on channels other than the
selected channel will not activate the LED.
Parameter Editing Status
When not receiving MIDI, or indicating storage success, the LED will tell you
two things about the parameter editing status of the sound you are running:
1. Has the selected parameter been changed from the stored value?
If the selected parameter matches the stored value, the LED will be
green. Otherwise it will be red.
2. Do the knobs correctly indicate the sound that is running?
If the knobs are accurate the LED will be steady. If the knobs are not
accurate (for example, after loading a program or changing the
selected parameter via MIDI), the LED will blink.
LED Steady Parameter Unchanged
Knobs Accurate
LED Blinks Parameter Unchanged
Knobs Inaccurate
GREEN
Front Panel Operation
RED
Parameter Changed
Knobs Accurate
Parameter Changed
Knobs Inaccurate
2-3