D-Link DCS-7110 User Manual page 36

Configuration
IPv6
Enable IPv6: Select this option and click Save to enable IPv6 setting. Please note
that this only works if your network environment and hardware equipment support
IPv6. The browser should be Microsoft® Internet Explorer 6.5, Mozilla Firefox 3.0 or
above.
When IPv6 is enabled, by default, the camera will listen to router advertisements and
be assigned a link-local IPv6 address accordingly.
IPv6 Information: Click this button to obtain the IPv6 information. If your IPv6
setting are successful, the IPv6 address list will be listed in the pop-up window.
Please follow the steps below to link to an IPv6 address:
1. Open your web browser.
2. Enter the link-global or link-local IPv6 address in the address bar of your web
browser.
3. Press Enter on the keyboard or click Refresh button to refresh the webpage.
Manually Setup the IP Address: Select this option to manually configure IPv6 setting
if your network environment does not have DHCPv6 server and advertisements-
enabled routers.
D-Link DCS-7110 User Manual 36