D-Link DCS-7110 User Manual page 35

Configuration
• Enable UPnP Presentation: Select this option to enable UPnP presentation for the
camera so that whenever a camera is presented to the LAN, shortcuts of connected
cameras will be listed in My Network Places. You can click the shortcut to link to
the web browser. Currently, UPnP is supported by Windows XP or later. Note that
to utilize this feature, please make sure the UPnP component is installed on your
computer.
• Enable UPnP Port Forwarding: To access the camera from the Internet, select this
option to allow the camera to open ports on the router automatically so that video
streams can be sent out from a LAN. To utilize this feature, make sure that your router
supports UPnP and it is activated.
How does UPnP work?
UPnP networking technology provides automatic IP configuration and dynamic discovery
of devices added to a network. Services and capabilities offered by networked devices,
such as printing and file sharing, are available among each other without bothersome
network configuration. In the case of Network Cameras, you will see Network Camera
shortcuts at My Network Places.
PPPoE: Select this option to configure the camera to make it accessible from anywhere
with an Internet connection. Note that to utilize this feature, it requires an account
provided by your ISP.
Follow the steps below to acquire the camera's public IP address.
1. Set up the camera on the LAN
2. Go to Live View > Setup > Event management > Event settings > Server Settings
(please refer to Server Settings to add a new e-mail or FTP server)
3. Go to Setup > Event management > Event settings > Media Settings (please refer
to Media Settings). Select System log so that you will receive the system log in TXT
file format which contains the camera's public IP address in your e-mail or on the FTP
server.
4. Go to Setup > Network > IP settings. Select PPPoE and enter the user name and
password provided by your ISP. Click Save to enable the setting.
5. The camera will reboot.
6. Disconnect the power to the camera. Remove it from the LAN environment.
D-Link DCS-7110 User Manual 35