Installation
1. Locate an area on the wall which is capable of supporting the weight of the
camera.
2. Mark and drill three pilot holes aligned to the screw holes at the base of the
mounting bracket.
3. Insert the plastic anchors into the pilot holes, and align the holes at the base of
the camera bracket with the plastic anchors.
4. Once aligned, insert the provided screws through the holes at the base of the
camera bracket.
5. Use a screwdriver to tighten and secure the bracket into place.
6. Attach the camera enclosure to the mounting bracket. Align the camera to the
correct field of view and tighten the thumbscrew to lock it into place.
7. The camera cables can be installed through a separate large hole drilled in the
wall, or using an external cable conduit.
D-Link DCS-7110 User Manual
Wall Mount
11