NETGEAR HDX111 - Powerline HD Plus Ethernet Adapter User Manual page 23

The following table describes the items on the Main tab.
Table 2-1. Main Tab Fields and Settings
Item
Powerline HD Devices
Network ID
Device Name
MAC Address
Location
Quality
Rx (Mbps)
Tx (Mbps)
Firmware Version
Control Buttons
Powerline Mode Options
HDX111 Configuration Utility
HDX111 Powerline HD Plus Ethernet Adapter User Manual
Description
The number of Powerline devices discovered.
The network ID of the local Powerline device. All devices shown in the device
table (3) share the same network ID.
The device name is initially set by the utility. You can use the Rename button to
change it.
The physical address of the Powerline device.
Indicates whether the device is local or remote. The local device is the one
connected, via an Ethernet cable, to the PC running this utility.
Indicates the type of traffic that can be handled smoothly: HD Video, DVD Video,
or Data.
• HD Video. The device can handle high-definition video traffic smoothly. This
status will be shown if the transmit and receive link speed is greater than
80 Mbps.
• DVD Video. The transmit and receive link speed is greater than 50 Mbps.
• Data. The device cannot handle video data smoothly. This status will be shown
if the transmit or receive link speed is less than 50 Mbps.
Maximum receive link speed of the device.
Maximum transmit link speed of the device.
The firmware level of the device.
Rename. Click a device name, and type a new name.
Factory Reset. See "Resetting to Factory Defaults" on page
Firmware Upgrade. See
Wireless Mouse Interference. See
Configure how the utility scans for Powerline network devices, and how network
coexists with HomePlug devices. See
on page 2-9.
v1.1, March 2008
"Upgrading Firmware" on page
"Wireless Mouse Interference" on page
"Specifying Your Powerline Network ID"
2-7.
2-6.
2-8.
2-5