Wireless Mouse Interference - NETGEAR HDX111 - Powerline HD Plus Ethernet Adapter User Manual

HDX111 Powerline HD Plus Ethernet Adapter User Manual
b. Click OK to reset the device. A message displays to indicate whether or not the operation
succeeded.
c. Click OK to continue.
2. Once all remote devices have been reset, you can reset the local device. After the device is
reset and the utility finishes scanning, check that all devices in the network are listed on the
Main tab.

Wireless Mouse Interference

If the wireless mouse or wireless keyboard does not work properly after you install the Powerline
HD Ethernet adapter, you can use the HDX111 configuration utility to fix the problem.
1. On the Main tab, click the device name to highlight the device that is plugged near the wireless
mouse or keyboard.
Figure 2-12
2. Click the Wireless Mouse Interference button.
3. Select the Enable 27MHz Notch radio button.
4. Click Apply so that your change takes effect.
2-8
v1.1, March 2008
HDX111 Configuration Utility