Physical Features - NETGEAR HDX111 - Powerline HD Plus Ethernet Adapter User Manual

HDX111 Powerline HD Plus Ethernet Adapter User Manual

Physical Features

The HDX111 contains two buttons, three status lights, and an Ethernet port.
1.
2.
3.
4.
5.
6.
7.
Figure 1-1
The following table describes these physical features.
Table 1-1. HDX111 Physical Features
Item Description
1. Pass-through AC For best Powerline performance, connect adjacent electrical appliances of up to
outlet 15A directly to the pass-through AC outlet. The outlet filters out noise that affects
Powerline performance.
2. Standby button Turn Standby mode on or off. See
3. Security button Set up Powerline security or reset to factory default settings:
• To configure security, see
• To reset to factory default settings, press for about 12 seconds, until the Status
4. AP light Indicates the Powerline security access point and security configuration (see
"Securing Your Powerline Network" on page
• Blinking orange indicates that security is being configured.
• Solid orange on indicates that the Powerline HD Ethernet adapter is configured as
1-2
light (5) goes off.
the Powerline security access point.
Installing and Using the Powerline HD Plus Ethernet Adapter
v1.1, March 2008
"Standby Mode" on page
"Securing Your Powerline Network" on page
1-7"):
1-8.
1-7".