Recording - D-Link DCS-3430 User Manual

Section 3 - Configuration
In this section, you can configure and schedule the recording setting for your IP camera.
Enable Recording: Select this option to enable the recording feature.
SD Card: Selecting this will allow you to record to a SD Card inserted into
the SD slot on the right side of the unit. When recording to the SD
card, you can only use Event Based recording.
Samba Auth: To access your account on the Samba network drive, enter your account
or anonymous username and password.
Server: The name of your Samba server.
Shared Folder: The name of the shared folder used for recording.
Test: Click this thumbnail to verify the connection status of your camera to
the Samba network drive.
Samba Status: Displays the connection status that is determined by the system. You can
click Get Status to refresh the status.
Resolution: Select your pre-defined profile from the drop-down menu.
When Storage is full: When the recording storage area is full, you may choose to stop recording,
or recycle the recording files so that your camera can record the video
continuously.
Event Based: Records when Motion Recording, Digital Input 1, or Digital Input 2 is
triggered.
Prerecord: A preset amount of time before motion recording is triggered.
Postrecord: A preset amount of time after motion recording is triggered.
Continous: Select to continuously record.
Scheduled: Select this option to manually schedule and configure the starting and
ending time for the recording.
D-Link DCS-3411/3430 User Manual

Recording

42