Hardware Overview - D-Link DCS-3430 User Manual

Section 1 - Product Overview
1 Power Receptor
2 DI/DO Wiring
3 Power LED
4 Iris Level
5 Link LED
6 Reset Button
7 Microphone Port
8 BNC Connector
9 Audio Out Port
10 Ethernet Jack
11 Antenna Connector
D-Link DCS-3411/3430 User Manual

Hardware Overview

1
11
10
Connects to the supplied power adapter.
I/O connectors for external devices.
The power LED is on the back of the camera. As soon as the power adapter is connected to the camera, the LED will turn green.
Used only when the DC-Iris lens is connected. When adjusting the Iris level, you can determine the brightness of the video images.
A solid green light indicates a connection to an Ethernet device. The light will blink during data transmission.
Reset will be initiated when the reset button is pressed once and held until the Power LED flashes through its cycle twice.
Use to connect an external microphone.
The BNC connector is used for professional video connections. It benefits users who integrate digital IP camera into traditional system
(CCTV) for both analog and digital video streaming purpose.
Use to connect external speakers to provide 2-way communication
RJ-45 connector for Ethernet which can also be used to power the camera using Power over Ethernet (DCS-3411 only)
Connect wireless antennas (DCS-3430 only).
2
3
9 8
4
5
6
7
6