Network Setup - D-Link DCS-3430 User Manual

Section 3 - Configuration
Use this section to configure the network connections for you camera. All relevant information must be entered accurately.
LAN Settings: Settings for your local area network.
DHCP: Select this connection if you have a DHCP server running
on your network and would like a dynamic IP address to
be updated to your camera automatically.
Static IP Address:
You may obtain a static or fixed IP address and other
network information from your network administrator for
your camera. A static IP address will ease you for accessing
your camera in the future.
IP Address:
The fixed IP address.
Subnet Mask:
The default value is "255.255.255.0. " Used to determine if
the destination is in the same subnet.
The gateway used to forward frames to destinations in a
Default Gateway:
different subnet. Invalid gateway settings may cause the
failure of transmissions to a different subnet.
Primary domain name server that translates names to IP
Primary DNS:
addresses.
Secondary DNS:
Secondary domain name server to backup the primary one.
Enable UPnP:
Enable this setting to allow your camera to be configured as
an UPnP device in your network.
D-Link DCS-3411/3430 User Manual

Network Setup

33