D-Link DCS-3430 User Manual page 34

Section 3 - Configuration
Enable UPnP port
Enable this setting to allow the camera to add port forwarding entries into the router automatically.
forwarding:
Enable PPPoE:
Enable this setting if you network is using PPPoE service.
User Name:
The unique name to your account. You may obtain this information from your ISP.
Password: The password to your account. You may obtain this information from your ISP.
HTTP Port: The default value is 80.
RTSP port:
The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number
is 554.
D-Link DCS-3411/3430 User Manual 34