Marking Scenes You Want To See Again - Denon DVD-2910 Operating Instructions Manual

20 MARKING SCENES YOU WANT TO SEE AGAIN

2 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want.
Setting Marks (DVD-AUDIO / DVD-VIDEO)
During playback, press the MARKER button.
• The marker screen appears.
1
• Use the and cursor buttons to select the "
0 1
marks.
• " " is displayed if the mark is not set.
Press the ENTER button at the scene you want to
mark.
• A number is displayed.
2
• Up to five marks can be set.
(To select another marker, use the cursor buttons
( , ).)
0 1
Calling Out Marked Scenes and Clearing Marks
Use the and cursor buttons to select the marker number and
0 1
press the ENTER button.
3
• If the marker screen is not displayed during playback, press the
MARKER button to display it.
To clear the marker display:
Press the MARKER button.
To clear a marker:
Use the and cursor buttons to select a marker number and press the
0 1
CLEAR button.
• You can clear existing markers, but they are restored when you open
the disc tray or switch the unit to standby.
NOTES:
• All the markers added with this unit are cleared when the unit is switched to standby or the disc tray is opened.
• Depending on where the marker is set, subtitles may not be displayed.
1
1, 3
2, 3
MARKER
"
Remote control unit
Remote control unit
Remote control unit Remote control unit
ENGLISH
65