Denon DVD-2910 Operating Instructions Manual page 46

ENGLISH
SHARPNESS (HI) (–6 to +6) (Factory default: 0)
• This adjusts the sharpness of the image for the high
frequencies. (Only effective for progressive
images.)
HUE (–6 to +6) (Factory default: 0)
• This adjusts the balance between green and red.
3
(Not effective for progressive scan output nor
component output.)
CCS (0 to +3) (Factory default: 0)
• This performs removal of the color signal
component for images in which the color signal
component is mixed with the brightness signal.
(Only effective with progressive images.)
When Image Quality Adjustment 2 Is Selected and
Adjusted:
WHITE LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the white level.
CHROMA LEVEL (–6 to +6) (Factory default: 0)
• This adjusts the density of the color.
4
CHROMA DELAY (–2 to +2) (Factory default: 0)
• This adjusts the shift of the brightness signal and the
color signal of the image. (Only effective for
progressive images.)
DNR (Digital Noise Reduction) (0 to +6) (Factory default: 0)
• This reduces video noise.
When Gamma Correction is Selected and Adjusted:
Two kinds of displays are prepared for adjustment of Gamma Correction.
• When use the Numerical table of Gamma Correction. (Figure 1)
:Pressing the cursor button (ª)
• When use the Graph of Gamma Correction. (Figure 2)
:Pressing the enter button
Select the adjust point with cursor buttons (
the ENTER button.
(If the PICTURE ADJUST button is pressed before pressing the enter button, an adjustment level is not stored)
• The brightness level can be adjusted in range of 16 to 235.
• Pressing the cursor button (•) raises the level (and the image becomes brighter), and pressing the cursor button (ª) lowers
the level (and the image becomes darker).
• A press of the CLEAR button returns all of the setting points to the standard level.
5
The level of the selected point cannot exceed the level of the points above and below that point.
(A dark portion cannot be set to exceed a portion that is brighter than it.)
MEMORY 1
G0
24
Ending the Image Quality Adjustment
46
,
0
1 2
G1 G2 G3 G4 G5 G6 G7 G8
32 48 64 80 96 128 160 192
(Figure 1)
Remote control unit
), set the adjustment brightness level with cursor buttons (•, ª), and press
1
MEMORY 1
G9
224 GO : 0 2 4
235
0
0
1 2
MEMORY 1
0 0 0 0
Remote control unit
100
(Figure 2)