Marking Scenes You Want To See Again - Denon DVD-2900 Operating Instructions Manual

ENGLISH

20 MARKING SCENES YOU WANT TO SEE AGAIN

2 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want.
Setting Marks (DVD-AUDIO / DVD-VIDEO)
During playback, press the MARKER button.
• The marker screen appears.
1
• Use the
0
marks.
• "X" is displayed if the mark is not set.
Press the ENTER button at the scene you want to
mark.
• A number is displayed.
2
• Up to five marks can be set.
(To select another marker, use the cursor buttons
( , ).)
0 1
Calling Out Marked Scenes and Clearing Marks
Use the and
0
press the ENTER button.
3
• If the marker screen is not displayed during playback, press the
MARKER button to display it.
To clear the marker display:
Press the MARKER button.
To clear a marker:
Use the 0 and 1 cursor buttons to select a marker number and press the
CLEAR button.
• You can clear existing markers, but they are restored when you open the
disc tray or switch the unit to standby.
NOTES:
• All the markers added with this unit are cleard when the unit is switched to standby or the disc tray is opened.
• Depending on where the marker is set, subtitles may not be displayed.
62
1,3
2,3
and cursor buttons to select the "X"
1
cursor buttons to select the marker number and
1
OPEN /
POWER NTSC / PAL CLOSE
ON OFF
PROG / DIR
1 2 3
CLEAR
4 5 6
SRS TS
7 8 9
CALL RETURN
0 + 10
TOP MENU DISPLAY
1,3
ENTER
MENU PLAY
STILL /
STOP
PAUSE
SKIP SLOW / SEARCH
ANGLE SUBTITLE AUDIO SEARCH MODE
REPEAT A-B RANDOM MARKER 1
SETUP DIMMER PIC.ADJ P.D.MEMORY
ZOOM PAGE
MARKER
Remote control unit
ENTER
Remote control unit
Remote control unit
MARKER
X X X X X
MARKER
1 X X X X
ENTER
Remote control unit
MARKER
1 2 3 X X
MARKER
1 X 3 X X